|
|
|
|
|
|
meps:
New record high stainless steel output at 33 million tonnes in 2011
May 5, 2011
The total global outturn for crude stainless steel in 2010 has been provisionally reported at 30.685 million tonnes. This is 8.7 percent higher than the previous peak, in 2006. Worldwide production was 24.7 percent higher than in 2009, which was the low point of the recent recession. Most traditional steel making countries are still producing at well below their highest recorded levels, whereas China has more than doubled its output in the last five years. Further, year-on-year, global growth of 8.1 percent is forecast for 2011, to give another record output of approaching 33.2 million tonnes.
European Union stainless steelmaking in the fourth quarter of 2010 is now estimated at 1.78 million tonnes. European output has been supported by production of manufactured goods for sale to emerging nations, especially China. Domestic construction, yellow goods, energy and offshore applications are beginning to recover. Growth for 2011 is predicted at 4.1 percent, year-on-year.
The
United States estimated annual total is now 2.2 million tonnes - an increase of 35 percent over 2009. Market players observe a slow pickup in demand with a pent up potential for capital projects, which are mostly being held up by constrained financial input. Expansion of approximately 6 percent is predicted for 2011 over the previous twelve months, to give total of more than 2.3 million tonnes.
The 2010 outturn for
Japan was 3.27 million tonnes, which is still less than 84 percent of the 2006 all-time high. The effects of the earthquake and tsunami will have a negative influence on production figures from March onward. However, reconstruction work will increase demand. We forecast a minimal advance in annual output for 2011.
South Korea recorded a strong second half of 2010 to give an estimated total outturn for the year of 2 million tonnes. Domestic producers may be able to utilise increased capacity and take advantage of lost production and increased demand from rebuilding work in Japan to consume a forecast output growth of 10 percent this year. This would equal the 2006 record of 2.2 million tonnes.
Taiwan's 2010 provisional annual output of 1.5 million tonnes is still only around 93 percent of the 2006 peak. The country's two major producers plan to move towards using their full capacity during 2011. We predict a 5 percent, year-on-year, increase, to give a total of approaching 1.6 million tonnes.
Chinese production achieved a full year total of approximately 11.3 million tonnes, which was more than double the figure recorded in 2006. Continued significant growth of nearly 14 percent is predicted for 2011, which will produce an annual outturn of 12.8 million tonnes.
In addition, make sure to read these articles:
Steel - where´s your future and when?
Latest supply/demand roundup of hot rolled coil
June 2011 crude steel production
Global steel output forecast to reach almost 1.57 billion t in 2011
Consolidation in the EU stainless steel sector is a step nearer
World Steel in Figures 2011 is available online
China's steel demand is far from spent
April 2011 crude steel production
New record high stainless steel output at 33 million tonnes in 2011
March 2011 crude steel production
|
top of page
back
Tell a friend
print
read times
© 2011 GRIPS Intermedia GmbH All rights reserved. Reproduction in whole or in part without permission is prohibited.
|
|
All external sites will open in a new browser.
GRIPS media does not endorse external sites.
|
|